Home| Register/Login |Sitemap
¤    Recognition accorded to our in-house R&D unit by DSIR (Dept of Scientific and Industrial Research), Ministry of Science & Technology, Govt. of India    ¤    Academic Projects for students (Final Year), Periodical Training programme for students are commenced     ¤    Introducing fully moulded 'ELECTRO-POUR' Gel Running Systems.    ¤    Our MEDOX-CATALOGUE 2012-13 is ready for distribution. Please order your copy today    ¤    ISO 9001 : 2008 Certified    ¤
 
 
rayanz.com - Free web site statistics
Personal homepage website counter
  
 

In ELECTRO-POUR Vertical gel systems, the glass plates remain undisturbed after casting the gel and due to this the wells continue to remain intact and moreover the overall procedure is much easier to handle.

Technical Specifications:

 

Dimensions
12.4cm x 10.4cm x 10.3cm
No. Of Samples : 18 + 2
Gel Size : 8 x 7cm
Buffer Volume : <300ml

Complete Unit consists of
Dual Vertical Assembly.
Glass plates: 10(L) X 8(H) cm - 2 sets.
Comb 1 mm Thickness (10 wells) - 2 No’s.
Comb 1.5 mm Thickness (10 wells) - 2 No’s.
Spacer 1 mm Thickness - 4 No’s.
Spacer 1.5 mm Thickness - 4 No’s.
Gel Casting Stand - 1No.
Supporting Screws-12 No’s.
Casting Assembly Screw-2 No’s.
Casting Side Supports-2 No’s
Supporting Frames-4 No’s.
Multi Dual Tank -1 No.
Safety Lid-1 No.
Power cord & User Manual

 

1. Place ‘supporting frames’ on both sides of ‘Casting side Supports’ which are engaged with ‘Supporting screws’.

2. Keep ‘Casting side supports’ vertically on a plain surface and insert ‘Dual Vertical assembly’ into the side supports as shown in the picture. Ensure that the ‘Casting side Supports’ fit tightly into the slot provided at the base of Dual vertical assembly.

t

3. Arrange the glass plates by properly inserting the spacers in between.

t

4. Place the Glass Plates with Spacers as shown in the picture.

t

5. Insert ‘sets of Glass plates till it reaches the bottom and get locked with the side supports

t

6. Fix the glass plates firmly with the vertical assembly by tightening the supporting screws.

t

7. Place this whole assembly on top of the Gel Casting Stand as shown.

t

8. Insert casting assembly screws on both ends of the Gel Casting Stand.

t

9. Then gently turn the casting assembly screws on both sides to 90 degrees. This would allow the entire casting assembly to get lowered and as a result both sets of glass plates would firmly sit on the silicone sheets placed on the casting stand which temporarily seal the bottom of glass plates.

tt

10.&11. In this position the molten gel is added in between the glass plates and combs are placed firmly in place.

t

12.After solidification, remove the combs. Hold the comb at both ends and carefully remove as shown in the picture.

tt t

13, 14 &15.Remove the casting assembly screws from the casting stand. Gently lift and place the entire gel casting assembly into the Multi dual tank for running the gel. There is no hassle of removing the glass plates after casting the gel and transfer it to another assembly for running the gel.

t

16.Place the safety lid after pouring the required quantity of buffer into the tank and connect the power cord as shown in the picture.

 

 

Ordering Information

Cat.No

Product

Units

MX-1206-05

ELECTRO-POUR Mini dual Vertical Gel Electrophoresis

Set

 

 

 

 

 

   
© 2006 Medox Biotech India Pvt. Ltd. All Rights Reserved. |