Regular Horizontal Electrophoresis Systems

Products

Regular Horizontal Electrophoresis Systems

MEDOX-BIO Submarine (Horizontal) Gel Systems

Nucleic acids are routinely separated according to their mass and structural properties by electrophoresis on Agarose gels. Linear double stranded DNA has a constant negative charge per unit length of molecule, resulting from the phosphate backbone of the helix. Thus, they migrate towards the anode during electrophoresis at a rate that is inversely proportional to the log of the molecular mass. Electrophoretic separation of nucleic acids therefore is strictly according to size. The molecular mass of double stranded DNA fragments can be determined after electrophoresis by comparison with standards of known molecular masses.

Submarine gels, often called Horizontal agarose gels, are routinely used in the laboratory to analyze DNA. Agarose gels are submerged in electrophoresis buffer in a horizontal electrophoresis apparatus. The buffer and gel form a current bridge between the two electrode chambers. Ethidium Bromide is mixed in the gel matrix to enable fluorescent visualization of the DNA fragments under UV light after electrophoresis.

In addition to its importance as an analytical tool, gel electrophoresis is widely used for isolating and then purifying specific fragments of DNA, usually in preparation for subcloning. Hence, this is a very commonly required procedure.

MEDOX-BIO Submarine Gel Systems are designed to suit various applications related to Nucleic acid separation in laboratories. These computer-designed systems are made out of well-polished and clear Plexiglass sheets fused together by using high-strength solvent adhesives. Our strict Quality control measures ensure the unit is leak-proof and withstand heat generated due to high voltage and longer running time.

Every Gel System has clear markings to indicate Buffer level in Gel tank.

The system is complete and supplied with all accessories required to run the gel.

  • Dimensions: 15cm(L) x 7cm(B) x 6cm(H)
  • No. Of Samples: 5
  • Buffer Volume: 150 ml
Complete unit consists of
  • Basic unit with Platinum Electrode
  • Gel running Tray of 7 x 4cm (1 No.)
  • 5-well polished acrylic comb with 1.5mm thickness (2 Nos.)(Well width = 5mm; Interspace = 3mm)
  • 4-well polished acrylic comb with 1.5mm thickness (1 No.) (Well width = 6mm; Interspace = 4mm)
  • Power cord and Lid (1 No. each)
  • User Manual
Ordering Information
Cat.No Product Units
MX-1201-01 MEDOX-BIO® JUNIOR Submarine Gel Electrophoresis Set
  • Dimensions: 20cm(L) x 10cm(B) x 7cm(H)
  • No. Of Samples: 8
  • Buffer Volume: 300ml
Complete unit consists of
  • Basic unit with Platinum Electrode
  • Gel running Trays of 7 x 5cm (1 No.) and 10 x 7cm (1 No.)
  • 8 -well polished acrylic comb with 1.5mm thickness (2 Nos.) (Well width = 5mm; Interspace = 3mm)
  • 3 -well preparative acrylic comb with 1.5mm thickness (1 No.) (Well width =18mm; Interspace = 4mm)
  • Power cord and Lid (1 No. each)
  • User Manual
Ordering Information
Cat.No Product Units
MX-1200-01 MEDOX-BIO® Mini Submarine Gel Electrophoresis Set
  • Dimensions: 27cm(L) x 16cm(B) x 8cm(H)
  • No. Of Samples: upto 36
  • Buffer Volume: 500ml
Complete unit consists of
  • Basic unit with Platinum Electrode
  • Gel running Trays of 13 x 10cm with two comb slots (1 No.)
  • Gel running Trays of 13 x 6cm (1 No.)
  • Gel running Trays of 7 x 5cm (1 No.)
  • 8 wells polished acrylic comb with 1.5mm thickness (1 No.) (Well width = 5mm; Interspace = 3mm)
  • 13 wells polished acrylic comb with 1.5mm thickness (2 Nos) (Well width = 5mm;Interspace = 5mm)
  • 18 wells polished acrylic comb with 1.5mm thickness (2 Nos)(Well width = 4mm; Interspace = 3mm)
  • 3 -well preparative acrylic comb with 1.5mm thickness (1 No.)(Well width=18mm; Interspace= 4mm)
  • Power cord and Lid (1 No. each)
  • User Manual
Ordering Information
Cat.No Product Units
MX-1205-01 MEDOX-BIO® Midi Submarine Gel Electrophoresis Set
  • Dimensions: 37cm(L) x 25cm(B) x 8cm(H)
  • No. Of Samples: upto 60
  • Buffer Volume: 1000ml
Complete unit consists of
  • Basic unit with Platinum Electrode
  • Gel running Tray of 20cm x 20cm (1 No.)
  • Gel running Tray of 20cm x 15cm (1 No.)
  • 26-well polished acrylic comb with 1.5mm thickness (2 Nos.)(Well width = 4mm; Interspace = 3mm)
  • 30-well polished acrylic comb with 1.5mm thickness (2 Nos.)(Well width = 3mm; Interspace = 3mm)
  • Power cord and Lid (1 No. each)
  • User Manual
Ordering Information
Cat.No Product Units
MX-1210-01 MEDOX-BIO® Maxi Submarine Gel Electrophoresis Set
  • Dimensions: 47cm(L) x 25cm(B) x 11cm(H)
  • No. Of Samples: upto 60
  • Buffer Volume: 1000ml
Complete unit consists of
  • Basic unit with Platinum Electrode
  • Gel running Tray of 20cm x 20cm (1 No.) with two comb slots
  • Gel running Tray of 20cm x 15cm (1 No.) with two comb slots
  • 26-well polished acrylic comb with 1.5mm thickness (2 Nos.) (Well width = 4mm; Interspace = 3mm)
  • 30-well polished acrylic comb with 1.5mm thickness (2 Nos.) (Well width = 3mm; Interspace = 3mm)
  • Power cord and Lid (1 No. each)User Manual
Ordering Information
Cat.No Product Units
MX-1211-01 MEDOX-BIO® Maxi Submarine Gel Electrophoresis with water circulation Set
Note : We also supply custom-made Gel Electrophoresis apparatus & accessories (Combs, etc.,) to suit your actual requirement. Please contact our Technical Services Department for further details regarding this.
Cat. No.ProductUnits

MEDOX-BIO® Junior Submarine Gel Electrophoresis

MX-1201-02Gel Casting assemblyEach
MX-1201-03Gel Casting trayEach
MX-1201-04Gel running tray: 7 x 4 cmEach
MX-1201-05Gel running tray: 7 x 4 cm(UVT)Each
MX-1201-06Acrylic comb, 1.0mm thickness, 4-wellEach
MX-1201-07Acrylic comb, 1.5mm thickness, 4-wellEach
MX-1201-08Acrylic comb, 1.0mm thickness, 5-wellEach
MX-1201-09Acrylic comb, 1.5mm thickness, 5-wellEach
MX-1201-10Gel Scoop (Ordinary) for Junior gelEach
MX-1201-11Gel Scoop (UVT) for Junior gelEach

MEDOX-BIO® Mini Submarine Gel Electrophoresis

MX-1200-02Gel Casting assemblyEach
MX-1205-02Gel Casting tray: 7 x 5cmEach
MX-1200-04Gel Casting tray: 10 x 7cmEach
MX-1200-05Gel running tray: 7 x 5cmEach
MX-1200-06Gel running tray: 7 x 5cm (UVT)Each
MX-1200-07Gel running tray: 10 x 7cmEach
MX-1200-08Gel running tray: 10 x 7cm (UVT)Each
MX-1200-09Acrylic comb, 1.0mm thickness, 8-wellEach
MX-1200-10Acrylic comb, 1.5mm thickness, 8-wellEach
MX-1200-11Acrylic Preparative comb, 3.0mm thickness, 3-wellEach
MX-1200-12Gel Scoop (Ordinary) for Mini gelEach
MX-1200-13Gel Scoop (UVT) for Mini gelEach
 

MEDOX-BIO® Midi Submarine Gel Electrophoresis

MX-1205-02Gel Casting assemblyEach
MX-1205-03Gel Casting tray: 13 x 6cmEach
MX-1205-04Gel Casting tray: 13 x 10cmEach
MX-1205-05Gel Casting tray: 13 x 6cmEach
MX-1205-06Gel Casting tray: 13 x 6cm (UVT)Each
MX-1205-07Gel Casting tray: 13 x 10cm with two slotsEach
MX-1205-08Gel Casting tray: 13 x 10cm with two slots (UVT)Each
MX-1205-09Acrylic comb, 1.0mm thickness, 13-wellEach
MX-1205-10Acrylic comb, 1.5mm thickness, 13-wellEach
MX-1205-11Acrylic comb, 1.0mm thickness, 18-wellEach
MX-1205-12

Acrylic comb, 1.5mm thickness, 18-well

Set
MX-1205-13

Gel Scoop (Ordinary) for Midi gel

Set
MX-1205-14

Gel Scoop (UVT) for Midi gel

Set

MEDOX-BIO® Maxi Submarine Gel Electrophoresis

MX-1210-02Gel Casting assemblyEach
MX-1210-03Gel Casting tray: 20 x 15 cmEach
MX-1210-04Gel Casting tray: 20 x 20 cmEach
MX-1210-05Gel Casting tray: 20 x 15 cm with two slotsEach
MX-1210-06Gel Casting tray: 20 x 15 cm with two slots (UVT)Each
MX-1210-07Gel Casting tray: 20 x 20 cm with two slotsEach
MX-1210-08Gel Casting tray: 20 x 20 cm with two slots (UVT)Each
MX-1210-09Acrylic comb, 1.0mm thickness, 26-wellEach
MX-1210-10Acrylic comb, 1.5mm thickness, 26-wellEach
MX-1210-11Acrylic comb, 1.0mm thickness, 30-wellEach
MX-1210-12Acrylic comb, 1.5mm thickness, 30-wellEach
MX-1210-13Gel Scoop (Ordinary) for Maxi gelEach
MX-1210-14Gel Scoop (UVT) for Maxi gelEach
MX-1210-15Power Cord (which suit all Ranges Of
Medox Bio Electrophoresis Systems)
Set

Specialized in Manufacturing & Supplying Products for Research.

×